#Phantom 4 pro video format settings download#
#Phantom 4 pro video format settings free#

#Phantom 4 pro video format settings free#

* Unobstructed, free of interference, when FCC compliant.

Wi-Fi transmission also compares poorly, suffering from low latency, lengthy re-connection times, and short transmission distances due to the high cost of more powerful Wi-Fi transmission. It also suffers from poor image quality and short range. Traditional analog video transmission occupies a larger bandwidth and is more susceptible to interference. It ensures high quality, low latency image transmission across its range and offers pilots a better shooting experience. The Lightbridge video transmission system uses advanced transmission technologies and can automatically adjust to environmental conditions.

#Phantom 4 pro video format settings download#

Tightly integrated with DJI GO 4, Lightbridge video transmission also sends vital flight statistics in real time, and can be used to quickly download photos and videos to connected mobile devices. By supporting 2.4GHz and 5.8 GHz frequency bands, it gives you more reliable control. Before each flight, it scans a range of available frequencies to find and use the one with the least interference. Using brand new DJI Lightbridge HD video transmission technology, the Phantom 4 Pro has a maximum transmission range of 4.3i (7km)*. *Obstacle Avoidance is not available with TapFly Free TapFly Free – Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies. tap in the bottom right corner of the screen to fly backward towards the top left. TapFly Backward – Tap to fly in the opposite direction of the tap, i.e. TapFly Forward – Tap to fly in the selected direction In total, there are now three TapFly modes:

As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro or tilt the gimbal as required without changing the direction of flight. A new AR route function shows the aircraft’s real-time flight direction for reference as its route is adjusted.

Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles * and tap the screen again or use control sticks to change direction. This ensures the optimum range of a maximum video transmission of 4.3mi (7km)*.įly in any direction visible on-screen with a simple tap. When switched on, the Phantom 4 Pro evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. The Lightbridge HD video transmission system used in the Phantom 4 Pro uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. If using the same frequency the video transmission system and the remote controller will interfere with each other, causing image lag.

Normally, Wi- Fi video transmission systems use a 2.4GHz frequency to work with a controller using a 5.8GHz frequency as this prevents interference that can occur when both use the same frequency. The ability to choose between 2.4GHz and 5.8GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4GHz frequency use. The Phantom 4 Pro controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. NEW LIGHTBRIDGE VIDEO TRANSMISSION SYSTEM